Guarantee: 1 years
Relevant Industries: Production Plant, Retail, Strength & Mining
Customized assistance: OEM, ODM, OBM
Material: #forty five
Common: ISO
Pitch: 12.7mm
Certification: ISO 9001:2000
Produced type: Equipment manufactured
Series: Simplex
Procedure prerequisite: Good lubrication, below regular running situations
Service: OEM/ODM
Application: Equipment Parts
Perform: Transmission
Item title: 08A ansi industrial drive transmission forty chain sprocket
Teeth: 31T
Packaging Particulars: plastic bag+carton box+plywood case for 08A ansi common single strand industrial generate transmission forty chain sprocket
Port: ZheJiang or HangZhou, or any port in China

08A ansi standard single strand industrial drive transmission 40 chain sprocket

Identify 08A ansi regular one strand industrial generate transmission forty chain sprocket
Pitch twelve.7mm (.5″)
Standard Conforms with ANSI B29.1 ISO 606 DIN 8187
Processing Heat treatment
Delivery time By specific: DHL, FedEx, UPS or TNT, it usually requires about 3-6 operate times to arrive.
By air: It typically will take about 3-6 function times to get there at airport.
By sea: It normally will take about 15-forty five operates times to get there.

Product pictures








p d1
mm mm mm mm mm mm mm mm
04B-one 6.000 4.00 2.eighty 1.eighty five 6.eighty/ 7.8 5.00 .sixty 3./682
05B-1 8.000 5.00 3.00 2.31 8.20/ 8.nine 7.10 .80 5./1136
*06B-one 9.525 6.35 5.72 3.28 13.fifteen/ 14.1 8.twenty 1.thirty 9./2045
08B-one hundred 8.51 7.seventy five 4.forty five 16.70/ 18.two eleven.eighty 1.60 eighteen./4091
10B-1 fifteen.875 ten.16 9.65 5.08 19.fifty/ twenty.9 14.70 1.70 22.4/5091
12B-one 19.050 12.07 eleven.sixty eight 5.72 22.50/ 24.2 16.00 1.85 29./6591
16B-1 twenty five.four hundred fifteen.88 17.02 8.28 36.10/ 37.four 21.00 4.15/ 60./13636
20B-one 31.750 19.05 19.fifty six ten.19 forty one.30/ forty five, 26.forty 4.5/3.5 ninety five./21591
24B-one 38.100 twenty five.forty twenty five.40 14.sixty three 53.40/ 57.8 33.twenty 6./4.8 160./36364
28B-1 forty four.450 27.94 30.99 15.90 65.ten/ 69.5 36.70 7.5/6. 200./45455
32B-1 fifty.800 29.21 thirty.99 seventeen.eighty one sixty six.00/ 71. forty two.00 7./6. 250./56818
40B-1 63.500 39.37 38.ten 22.89 82.20/ 89.2 52.96 8.5/8. 355./80682
48B-one 76.two hundred 48.26 forty five.seventy two 29.24 99.10/ 107. sixty three.80 12./ten. 560./127272
56B-1 88.900 fifty three.ninety eight fifty three.34 34.32 114.6/ 123. 77.eighty 13.5/12. 850./193180
64B-1 a hundred and one.sixty 63.50 60.96 39.40 one hundred thirty./ 138.5 ninety.seventeen 15./thirteen. 112./254544
72B-one 114.thirty seventy two.39 68.58 forty four.forty eight 147.4/ 156.4 103.60 seventeen./fifteen. 1400./318180

Organization orientation Business orientation
Top quality orientation: Previously mentioned the typical, mostly exported to United states, Europe, Asia and so forth.
Strictly according: ISO/ANSI/DIN normal.
Cost orientation: Price tag-performance ratio is extremely higher.

Why pick us? one. We are producer.

two. We acquired the certification of TUV GERMANY in 2016.

three. We have 21 several years heritage in chain, sprocket, coupling area, and just target on it, do about 8 several years of export investing.

four. Its the scientific and technological tiny and medium enterprises of ZHangZhoug province.

five. Sturdy technological innovation crew and innovative gear. (our manager was complex main of chain standard factory, at start, there are only 2 factories in China just before).

six. Limited supply time, tools is advanced.

seven. Price tag is just over the typical in China, good quality is strictly in accordance to ISO/ANSI/DIN normal, so price-overall performance ratio is really high. Primarily exported to middle-higher industry.

eight. Targeted traffic is very simple, about 5 minutes generate distance from railway station and the exit of freeway.

nine. We have received USD 55,000 trade assurance from, is the first batch of its users.

10. You could spot trade assurance buy to us by Alibaba, to assure the shipping time and top quality.

11. We settle for T/T, D/P, D/A, O/A, L/C payment terms, for modest purchase, paypal, western union are both ok.

12. OEM/ODM are both obtainable.

thirteen. Marking your brand name or other character on chain is workable, need to have your authorization of model using.

Much more Goods

Generation procedure
Packaging & Shipping

Business DetailsIntroduction of business
Company Kind: Manufacture
Place: HangZhou, China mainland
Yr Established: 1995
Business Certification: ISO 9001
Main Goods: Leaf Chain, Auto Chain, Silent Chain, Driving Chain, Conveyor Chain, Unique Chain…

After sales service
one. We will be glad to offer you 24 several hours services a day.
two. One particular yr high quality assure time period underneath widespread atmosphere for use, and defective product cost-free of charge in 1 yr.
3. Any response from our buyers will be extremely appreciated.


Want to know a lot more about us?
Q: How to establish the have faith in and know our quality?
A: Sample can be despatched to clients for high quality checking 1st.

Q: Can you do custom made emblem on the chain?A: Sure,we can do personalized logos by molding. Need your Authorization Letter. Q: What is your sample charge?A: Duration shorter than 20cm is totally free, convey charge gathered. sample demand can be returned following location buy later.Q: How to check out factory?A: Leave us a message, and we will select you up by car for free of charge. Q: What is your mass products delivery time?A: 15 days for 250,000 meters. Specific time must be in accordance to the QTY. How to contact us?Deliver Your Inquiry Information In the Below, Click on “send” Now! Thank you and Have a great day!

Return to house web page

How to Use Sprocket for Conversion Optimization

The sprocket is usually attached to the shaft with one or more set screws. These set screws are usually ANSI standard sizes. However, these standards are not always suitable for all applications. Therefore, it is important to find a supplier who understands the correct keyway size for a specific application.

Typical sprocket

Typical sprocket hardnesses range from 35 to 40 HRC, depending on the application. However, some applications require lower hardness levels. The hardness level is determined by the material used to manufacture the sprocket. Further tempering can further reduce the hardness level. For example, conveyor sprockets with long pitch line thicknesses may not require hardening.
Steel is the most commonly used material for standard sprockets. However, many types of materials can also be used. The material used to make the sprocket depends largely on the type of equipment and tools used to make the sprocket. Steel is the most common building material because of its versatility and hardness and its use in a variety of applications. Bronze is another common material used for sprockets, usually in non-magnetic environments.
Another common material used for sprockets is reinforced plastic. While sprockets may look similar to gears, the main difference is their teeth and their ability to interlock with the chain. This allows simple rotational movement of large equipment and machinery.
The number of teeth on the sprocket is measured according to the number specified by the standard. An example is the ISO-DIN standard. A typical sprocket has an odd number of teeth to prevent the teeth from wearing out and causing the chain to slip.
A typical sprocket has rollers on the bottom and teeth on the top. When the chain meshes with the sprockets, the rollers get caught on the teeth. The rollers then pull the strap back, removing the extra force. However, if the bottom half of the chain is slack, the rollers will sit on the teeth and the chain will jump forward one tooth.


Sprocket is an important feature for optimizing the user experience of your website. It works by analyzing user behavior on your website and delivering personalized interactions at the right time. This feature can also help you increase the conversion rate of your website. In this article, we’ll explore how to use Sprocket for conversion optimization.
The easiest way to explain the function of a chainring is to imagine a bicycle. The large sprocket is mounted on the pedal axle of the bike, and it drives the chain, which in turn drives the small sprocket on the rear wheel. The same principle is used for motorcycles and some other motor vehicles.


Sprocket assemblies are wheel-shaped assemblies that hold gears and other components in place. They allow precise rotation of large gears. They can be made of metal or reinforced plastic. Different designs are available to suit different applications. Here are some examples. Sprockets are used for heavy duty rollers.
The components 12 and 14 slide together in the axial direction relative to the drive shaft 18 . The protrusions 22 on one part fit into complementary shaped grooves on the other part. Usually, the two parts are the same, but they can be different. For example, jigsaw-shaped protrusions may fit into grooves in opposing portions.
Sprocket components are usually made of metal or reinforced plastic. They resemble gears due to their wheel-shaped design and teeth. However, sprockets interact with different types of chains. Most sprocket chain systems operate similarly to bicycle chain assemblies. To ensure proper performance, choose the correct one for your specific application.
Whether you’re buying sprockets for an electric car, bike, or construction project, make sure you choose the right sprocket. Sprockets are versatile. A single sprocket may have one or two teeth, while a triple sprocket may have two or more.

Put on

Proper maintenance of your bicycle’s chain and sprockets is critical to the performance and safety of your bicycle. These components wear out over time and should be replaced in the correct order. A well-maintained bike can go from 20,000 to 30,000 miles on one set of components. Mileage depends on the quality of the chain and sprockets and the type of riding style. For your safety and the performance of your bike, it is recommended to replace these components every few thousand miles.
Identifying a worn sprocket is easy; you can easily notice when a sprocket’s teeth are cut off. A badly worn sprocket will be unusable and your chain will end up stuck between the teeth. If the chain is damaged by worn sprockets, you should replace the chain.
When a chain or sprocket needs to be replaced, it is important to ensure that the sprocket is properly lubricated. Oiling will make the chain and sprocket more efficient and reduce the risk of damage. A good rule of thumb is to use anti-rust oil to protect your bike from corrosion.
In order to maintain the sprocket, you should follow the manufacturer’s maintenance instructions. You must replace them in the correct order. The first step is to remove the old sprocket and discard it. Old sprockets cannot be mixed with new sprockets.
It is also important to replace the front and rear sprockets when returning the chain. You should also lubricate the chain to prevent rust. Before lubricating, you can clean the chain with a non-petroleum-based cleaner. Don’t use oil as it doesn’t protect the chain from water and is more viscous.

China Standard 08A ansi standard single strand industrial drive transmission 40 chain sprocket     sprocket bushingChina Standard 08A ansi standard single strand industrial drive transmission 40 chain sprocket     sprocket bushing
editor by czh